A few weeks ago, I finally managed to lay hands on the last item required for build ideas I had for the Himalayan. 23500 kms and 3 years, 8 months in the making, I’m very happy with the way it has turned out. Almost everything added to the bike is a genuine Royal Enfield accessory. No cheap aftermarket bits and bobs here.
Himalayan, circa 2020Himalayan, circa 2020Retro-tourer, circa 2020.
In my last post Essential Upgrades, I had talked about replacing the worn out stock seat with a Touring Seat. The Touring Seat took me more than 6 months to locate and buy. For some weird reason, Royal Enfield does not have online sales for bike accessories. And this one is a best seller that almost every dealership runs quickly out of.
For more than a year, I ran the bike without any kind of wind protection. I was glad to get rid of the fiddly stock visor which had a serious buffeting issue at high speeds. However, I still felt the need for a smaller cowl or fly screen to complete the look of the bike.
Made a quick sketch to see how a flyscreen would look.
A quick sketch on my iPad convinced me that a flyscreen might just do it. Got myself an Interceptor 650 flyscreen the next day. Had to convince my mates at Highlander, my friendly neighbourhood Moto workshop, to file and shape the mounting bracket. But other than that, it was an easy fit.
Short Flyscreen from the Interceptor 650. A high intensity LED bulb from NightEye replaces the stock bulb in the headlight.
Here’s a summary of additions to the bike at 20000kms.
Upgraded the handle-bar to the Braced Handlebar Kit (Part no. 1990206). The handlebar weighs 20% less than the stock bar, is beautifully finished, and Made in Taiwan. From Royal Enfield Brand Showroom, BTM Layout, Bangalore.
Installed Bar-End Finisher Kits (Part No.1990220) for the same handlebar. From Royal Enfield Brand Showroom, BTM Layout, Bangalore.
BMC Lifetime Filter for the Himalayan- Sourced from Big Bear Customs, St. Marks Road, Bangalore.
Brake Reservoir protector from the Continental GT (535). (Available at most Service Centres)
Metzeler Tourance Next tyres- 90/90-21 to the front, 150/70- 17 to the rear. (Orion Motors, Koramangala)
Short Flyscreen from the Royal Enfield Interceptor 650, (Royal Enfield Brand Showroom, BTM Layout)
Royal Enfield Aluminium Panniers with mounts (Royal Enfield Brand Showroom, BTM Layout)
Royal Enfield Touring Seat for the Himalayan (Royal Enfield Brand Showroom, BTM Layout)
To know about other bits of DIY which shaped the bike, and my overall ownership experience, you can catch up here. If you are a Himalayan owner and have done some fiddling yourself, do drop me a line. 😊
The bike setup feels perfect for lazy ganders through backroads like this. 😊
This post might interest potential Royal Enfield Himalayan buyers. My Himalayan is now more than two and a half years old. The bike crossed 15000 kms last November. Here’s a summary of what you can expect, long term, should you decide to buy this motorcycle. Some of the points below have been touched upon in the Himalayan 10000km update
Himalayan, circa 2019.
THE ENGINE
The carburetted, long stroke engine, with a counter balancer, is easily one of Royal Enfield’s most sorted singles till date (Power 24.5 bhp, Torque 32NM). Whether on an everyday commute or on a longer ride, the motor performs flawlessly. I changed to a lifetime BMC filter more than a year ago, which has lent some smoothness to the mill, and a deeper grunt to the exhaust. Sweet spot for my bike remains in the 80-110 kph zone, when I’m in 4th gear, taking on a curve and revving up to slot to 5th. Its rev happy, provides oodles of torque and a great rumbling note, making this bike a delight on winding back roads.
Road, no road… the Himalayan is great fun if the pace is unhurried.
The bike’s limits are more evident when you travel on an intercity six laner. As soon as you rev past 100kph, you feel the torque tapering off. Hit 120 kph, and you know you really don’t want to keep this up for too long. The engine isn’t exactly on song. There’s good amount of vibrations creeping in on footpegs and near the tank. Under favourable conditions (sunny day, smooth road), I have touched 130-135kph. It wasn’t a very enjoyable experience.
Throttle happy thrill seekers? No sir, not your cuppa.
Lazy tourers who believe in all day riding? Aye! Grab an easy chair, this is for you!
Earlier in the ownership experience posts, I had raved about how smooth the engine is, and in one report, compared the motor to the CBR 250R. Two years on, I can confirm that the RE engine has a few rough edges, fares poorly against the butter smooth Honda, and can’t sustain a top end whack. All moving parts have since settled in, and roughness is at bare minimum, but its there. The upside is that the UCE Engine, doing duty on all other RE single cylinder motorcycles, feels primitive compared to the Himalayan’s mill.
Current lot of Himalayans being sold worldwide (post 2018), feature fuel injection and have better response. Maintaining speeds in the range of 100-120kph is decidedly smoother as well. They also feature dual channel ABS, which should give riders more confidence at these speeds.
RIDE AND ERGONOMICS
Ergonomics on the Himalayan are well sorted, as is the long travel suspension. All day rides on all manner of surfaces, is a breeze. This is one Royal Enfield, where the bar and the seat positions, need no tinkering with at all. While they did get the ergonomic triangle right, the bar and seat, can do with better quality. I have opted for a braced handlebar which is a lot better finished and feels sturdy. The stock seat starts hurting the insides of your thigh after 3-4 hours of continuous use. The cushioning on the seat is beginning to deteriorate. Time to look for a replacement.
CHANGE IS THE ONLY CONSTANT
Fiddling around with the look of the bike, I felt this bike is better off as a scrambler. It meant stripping it down as much as I could, without investing in any real customisation. Most of it was DIY on weekends. Now when I’ve stripped this bike clean, it’s so much more accessible. It’s easier to see where the front wheel is going. There’s less stuff on the bike to worry about. And there’s decent amount of weight reduction as well. Read more about these changes at Reduce to evolve
At present, I’m riding with these accessories, which I will strongly recommend:
Upgraded the handle-bar to the Braced Handlebar Kit (Part no. 1990206). The handlebar weighs 20% less than the stock bar, is beautifully finished, and Made in Taiwan. From Royal Enfield Brand Showroom, BTM Layout, Bangalore.
Installed Bar-End Finisher Kits (Part No.1990220) for the same handlebar. From Royal Enfield Brand Showroom, BTM Layout, Bangalore.
BMC Lifetime Filter for the Himalayan- Sourced from Big Bear Customs, St. Marks Road, Bangalore.
Brake Reservoir protector from the Continental GT (535). (Available at most Service Centres)
Continental GT (535) Rear View Mirrors. (Available at a few RE Service Centres)
The following upgrades are in the pipeline. I hope to get these on before crossing 20000 kms on the Odo.
Touring Seat (Part No. 1990208) (From Royal Enfield Accessories)
Braced handlebar kit offers precise fit, better strength and quality
Touring Seat upgrade…soon!
OWNERSHIP
On this bike, highs last and lows don’t. I was lucky that most technical issues, were quickly sorted out by my friendly neighbourhood service centre. There’s some things to be conscious of, which I have highlighted below:
Tyres– The stock tyres (Ceat Gripp XL 90×90/21 F & 120×90/17 R) are capable of taking on quite a beating. I’ve run them through all kinds of roads and trails and not suffered a single puncture to date. But they also wear out quick, compared to other tyres serving this category of motorcycles. My rear tyre, almost featureless at 15000km, had to be replaced. The front tyre, seems like it’ll live for another 5000 kms, tops. These tyres are not an easy find either. If you’ve loved the stock tyres on the Himalayan, chances are, you’ll not want to deviate from this spec. Unless you have moolah enough to invest in 21″ and 17″ Pirelli Scorpion Rally doing duty on Tigers, BMW 850 GS and Africa Twins. I’ve also shortlisted Metzeler Tourance and Pirelli MT 60 as possible upgrades. They are expensive upgrades which will need some forethought. Won’t offer a lot of mileage in Indian conditions, either. Roadholding and cornering ability is said to improve tremendously though.
Keep running the stock tyre past 15000km and you’ll be slippin’ an slidin’ everywhere!
Wear and Tear– Face it, if you’ve owned a Royal Enfield, chances are, you’ve made your peace with fading paint, rust issues and low life rubber parts. The Himalayan can be said to be a notch better. Engineering that qualifies it to be an adventure tourer, is mostly spot on- the suspension, brakes, wheel hubs, chain drive, general body balance and tightness, have fared well. There’s a beautiful acquired patina to the cast Aluminium fittings on the bike, revealed after each wash. What could be better, is the quality of rubber parts, especially fork boots, wire housings, bolt washers and connector caps. These have frayed visibly. The right fork seal was the latest to give in. Rusting is one of those subjects that’s talked about vigorously on the Internet, but has not been a major issue on my bike so far. The paint’s holding up.
Rubber parts, high on wear & tear.
DIY Friendly- This aspect of the bike is hard to beat. A simple bike, that a novice like me can take apart with basic tools. I can strip it down to chassis (with some bits like the battery and electricals still on the bike) in about 20 minutes flat. Here’s a list of things I’ve done, which I have never ever dared to do before on any other motorcycle.
– Stripping the bike of tank, seats, fender and number plate and tail light assembly.
– replacing the air filter
– removing the carburettor/ cleaning it
Furthermore, I have observed the following activities being done- and am confident of doing it myself because of how easy the Himalayan is when it comes to maintenance.
– Removing/ fitting the rear tyre
– Engine Oil change
Now if you look at the list above, there’s a good bit of DIY maintenance covered. I’m excluding instances of pannier mounting, chain lubing, carb tuning and other bits of easy maintenance which, for me were not new ground. But attempting the above list on the Classic 500 was a straight no, no, only to be trusted to my mechanic. Engaging with the bike, on a lazy Sunday afternoon, has taken on new meaning.
Strip it down? Took me all of 20 minutes!
Oil change? Three bolts on the right, two on the left. Drain oil, Replace oil filter, clean the oil mesh, refill oil and pop the bolts back on. No bottom of engine, faulty washer oil leakage issues here.
What you see in this picture, is everything that keeps the tyre in place. Tyre removal? Easy peasy.
Air filter access? 6 easy bolts to loosen and its out!
Touring and commuting– Having heard enough stories of how far folks are travelling with the Himalayan, I realise I’ve not used the bike to a quarter of its potential. I will vouch for it as a fantastic commuter. And most days of the year, for my 40km chaotic commute, the Himalayan has been my weapon of choice. On a few tours that I have done, the machine has been a comfortable mile muncher. The longest ride, was a 1200km plus two day sojourn round Wayanad, (Rolling Through Wayanad). The bike fared admirably, taking on offroad sections, twisties and high speed straights with equal aplomb.
The Himalayan is meant for roads like these.
So I think I’ve covered most of the aspects about the bike that I wanted to talk about. In the year gone by (2018), I’ve seen a lot of serious motorcyclists appreciating the Himalayan for what it really is- a no nonsense, do it all, everyday and everywhere motorcycle.
I have compiled below, a list of youtube feeds, from across the world. These happy owners are on a roll with the new 2018 Himalayan. Their stories are inspiring, and in some cases eye-opening. Enjoy!
Got myself a brand new Bell Qualifyer helmet. Wifey and me just fell in love with the retro themed stripes. Already appreciating some of the finer detailing compared to the outgoing MT Axis, I have used for more than 2 years. Will poke in a review soon!
As my bro- in- law road trips somewhere Down Under, I use his CBR250R for my office commute, every other day. All my excitement about the free revving and smooth nature of the Himalayan’s engine disappeared once I started riding the CBR on a regular basis. The CBR 250 R is indeed a gem, and at the time of its launch in India, had few equals among bikes which could be used as Sport Tourers. It’s only real competition at the time was the Duke 200 and the Ninja 250. While the Ninja offered similar performance at almost double the price, the Duke 200 lacked the finesse and touring capability that the CBR offered.
So on this crotch rocket with a super smooth mill, all I’d want is a pair of handlebar raisers. I still find the ergonomics too committed for more than an hour’s commute, what with the stop and go traffic in Bangalore, giving you a stiff neck in just about 15 minutes.
I suppose the bikes couldn’t be more contrasting, even when compared on a simple office commute. On the Himalayan, you are perched high over everything else, and have to barely crane your neck to figure out an exit path between car rooftops. You feel exalted and mighty, capable of taking on both the traffic and broken road surfaces at full throttle.
On the CBR, you are crouched low and wary, watching out for gaps between careening cars, estimating closing distances, flicking the bike with your thighs and body weight, and admitting, grudgingly so, that you are actually going faster than you would dare on the Himalayan. That said, the CBR, being the more involving motorcycle, also therefore is the more demanding one. You need to be more careful, you need to maintain body posture, lean in and out in sync and always be super alert. Sums up to an hour, give or take, before you start asking for that all day comfort and rider friendliness of the Himalayan.
Still, until my brother in law returns and claims rightful ownership of his red and silver winger, I pause every morning before the household key bowl, jangling first the RE, then the Honda keys in hand, contemplating the hour’s commute ahead of me, and wonder if I should ride low and hard or tall and easy. 😊
yonder blue mountain... 