Himalayan, Version 1.01

Some days after the incident with the rear carrier, a new issue reared its head. I first noticed it, a month ago, as a sudden drop in power, especially if I had to overtake someone/ something in a hurry. Revving the throttle with the clutch half pressed, generally sorted the issue- but there was a slight lag in the throttle response. In the days to follow, this lag became more pronounced. Initially I thought this was to do with a particular gear or speed that the bike was at, I later realised this occurred just when I had to cross 3000 Rpm on the tacho. I dilly dallied on getting the bike checked, as work and weekends were quite hectic. One morning, while climbing a flyover on Ring Road, I was also trying to overtake a cab. Revving the bike, to clear the 3000 rpm hurdle quickly, I darted past the 60kph mark as the throttle found its response. I carved in between two more cabs and a bus and came out of a thin zone to see brake lights shining brightly, 10 metres ahead of me. Now all this possibly happened in a few seconds, with traffic all round me barreling down the flyover at about 50kph. I braked hard, stopped short of the car’s fender and as the car moved, gunned the throttle to stop someone rear ending me. It was then that I realised that the engine had died..!

The bike had not stalled. I braked and the engine died.  This happened two more times in the following week. I decided then that I did not want any more life-affirming moments. An hour’s commute was turning into a dance with death! The time had come, for the machine to meet its…um, makers.

They kept the bike for a week. The guywhoknowsme, told me it will take time, that they will do a thorough check and resolve the issue. I went back after a week. And the bike was ready with three significant alterations.

  • The engine head assembly had been replaced
  • The oil cooler unit had been replaced
  • The carburettor had been replaced (culprit behind the power drop/ throttle lag).
  • The bike had been given some TLC otherwise and looked neat and clean.

Turns out that Royal Enfield is doing a silent REcall. I was told that certain chassis numbers had been identified for these critical parts updates within the warranty period. I was also told that post December 2016, all Himalayan’s are up to date and without issues. Good news then for prospective owners.

As for Shadowfax, well he is leaner, meaner, smoother and seems happier. I did not get a replacement for the carrier, but traded my GIVI box for a Viaterra Seaty tail-bag, which quite suits the bike. Don’t quite care for putting the carrier back on now, as the photos below will justify. 🙂

DSC_0688.JPG
Tailless Stallion
DSC_0694
The tail bag is quite a fit, integrates neatly with the bike. And packs a full size DSLR.
DSC_0693
Tails I win, heads you lose
IMG_2891
Love the fact that all you see now is that LED cluster at the back

I have also installed a mobile charger (ChargePLUS from Resonate)- which I felt, was a big miss from the manufacturers on a bike like this. Lloyd from Bike Nation, HSR Layout was a big help here- he is one of the few who stock this great product and he replaced a faulty charger immediately and without any fuss. I have used the charger off and on while commuting- on my i-phone, the current seems to come in after a time lag of about 3-4 seconds but sure enough it charges continuously after that. The only thing I’m not a big fan of, is the lightning cable itself, which could have been slightly longer and better armoured. Otherwise, the rest of the product is very well engineered. More details here-

http://myresonate.com/ChargePLUS.html

I rode the bike to-and-fro the workplace for a couple of days, after it came back from its makers. I had a hard time. You see, when you change half the engine, you are trying to run an engine with a multiple personality disorder. My understanding is that you have worn in, settled in parts and new parts which need to settle in. The initial few rides are best used to let the new parts settle in. Not so in crazy Bengaluru traffic! The bike heated up like an oven every 5 km, so I took one too many breaks watching traffic, breathing fumes and generally scrolling through the 5 apps on my phone like a zombie!

DSC_0690.JPG
Rest easy my friend, for at dawn we ride!

Which brings me to tomorrow. Sunday. I want to ride out. Out there in pure country, let the stallion run. Let it pace itself and find its rhythm. Let it come back refreshed and ready…to take me through next week’s grind!

RE_issues

It had to happen, eventually. My tryst with RE’s quality issues. Nothing lasts forever, they say. If there are Royal Enfield haters out there who read my previous  posts and have been gloating ever since- well, rejoice. Caught me out in the open, this one, I can only thank my stars that no one was hurt and that the mishap occurred twenty steps from home.

I used to run my bike with a set-up like this, with a GIVI top box mounted on the rear carrier. Now I’ve been running this set-up pretty much since I bought the bike (more than 6 months) and the only things I carry in the top-box are my macbook (13″) and a 1L water bottle. How much can that weigh , eh?

img_2648

So one fine evening, on a regular commute from work to home, I hear some creaking sound from the bike, as I swing into my neighbourhood. Two streets later, something falls off and hits the road. I look back- the top box and carrier, are gone…(with my laptop!). At home I park the bike and inspect the damage (thankfully my laptop started up, safe inside its bag)- the carrier has sheared off at the point where the load transfer should be optimum. I also realise that this is made of some alloy, not proper steel. This is a serious issue- how does one take on the mighty Himalayas, if on an adventure bike, the luggage carrier falls off with the weight of a laptop!

IMG_2883.JPG
Shear failure- rear carrier falls off!

….and this…

IMG_2960IMG_2884

IMG_2961
The broken carrier at the workshop!

Took the bike to my friendly neighbour hood service centre, and the ‘guywhoknowsme’ promised that the carrier will be replaced (and shouldn’t have failed!). Well, fingers crossed. Lets hope the replacement lives up to some expectations.

On the flip side, the bike has become a looker. With the carrier removed, the tail assembly and fat rear tyre catch the eye easily and the sleek silhouette of the bike looks more appealing…

IMG_2890.JPG
Here’s a teaser, will publish better day shots soon!